ST-35 Medium Tension Rubber Grommet for 300 Series Lever

(1 customer review)

500

Buy ST-35 Medium Tension Rubber Grommet for 300 Series Lever at the lowest price. Save money from import duty and save delivery time.

Quantity:
SKU: GR35 Category:

Description

The Samducksa 300 Series of joysticks commonly utilize a rubber grommet, which acts similar to a spring in a joystick lever.  It helps the shaft return to a neutral position after a direction is pressed and the microswitch is engaged.

The ST-35 Medium Tension is a popular middle grade, found in models such as the CWL-309FJ-KMS-ST35, CWL-303MJ-DX-ST35 Crazy Dongpal, CWL-309MJ-BENYLIS-ST35, CWL-309MJ-DX-QR-ST35, and CWL-309 HelpmeK-KMS-ST35.

MODEL AND PART GUIDE

The following reference list provides information of the battop, Silicone rubber, and bobbin style installed into each recent Crown model by the manufacturer. This is helpful if you are looking to purchase the correct grommet or bobbin for your chosen model.

BATTOP SILICONE RUBBER BOBBIN
CWL-309MJ-KMS-ST25 CWL-BAT Silicone Rubber ST25 CWL Bobbin
CWL-309 HelpmeK-KMS-ST35 CWL-BAT Silicone Rubber ST35 CWL Bobbin
CWL-309FJ-KMS-ST35 CWL-BAT Silicone Rubber ST35 CWL Bobbin
CWL-309MJ-BENYLIS-ST35 CWL-BAT Silicone Rubber ST35 CWL DX Bobbin
CWL-309MJ-ST30 New Helpme CWL-BAT Silicone Rubber ST30 New Helpme Bobbin
CWL-303MJ-DX-ST35 Crazy Dongpal CWL-DX-BAT Silicone Rubber ST35 CWL DX Bobbin
CWL-309MJ-DX-QR-ST35 Samducksa Clear BATTOP Silicone Rubber ST35 CWL DX Bobbin
Short SDL-301-DX SDL-BAT Silicone Rubber ST35 SDL Bobbin
SDL-301-DX-QR-ST35 Samducksa Clear BATTOP Silicone Rubber ST35 SDL Bobbin

 

If you intend to replace an existing grommet:

  1. First lift the battop and shaft from the joystick body.  To do this, you must remove the e-clip at bottom of the lever.  A mini screwdriver wedged into the e-clip often works, pulling the clip away from the shaft.  Be careful not to lose the e-clip, as it can fly off the shaft from the pressure. Lift the shaft upwards and put aside.  The actuator may also loosen from the microswitches which is normal – you can put it back on when reinstalling the e-clip.
  2. Second, remove the 4 long screws that hold the mounting plate and upper body in place. Remove the original grommet from its housing by pulling on the plastic ring with your thumb and fingers.

1 review for ST-35 Medium Tension Rubber Grommet for 300 Series Lever

5 Star

100 %
1 review(s)

4 Star

0 %
0 review(s)

3 Star

0 %
0 review(s)

2 Star

0 %
0 review(s)

1 Star

0 %
0 review(s)

Reviewed by 01 customer(s)

  • Avatar

    Amit Dey

    Received 35 tension grommet from game store India. Very fast delivery and very low prices. Save money and time as compare to purchasing IST mall and focus attack.

    June 7, 2021

Leave feedback about this

Your email address will not be published.